Under Incoterms 2020, DDP (Delivered Duty Paid) assigns import clearance and duty payment to the seller, but it does not dictate how authorities appraise goods. US and EU agencies assess customs value under their own valuation rules, applied to the goods themselves, regardless of the delivery term on the invoice.
Last updated: November 2026. Rates and regulations cited are current as of Q4 2026.
- Customs value is a regulatory determination, not a commercial construct.
- A DDP lump sum bundles carriage, insurance, and duty settlement around the goods.
- Authorities test the declaration against the transaction, documents, and comparable goods.
- The destination’s valuation basis dictates the appraised figure.

In this guide
- What Is Customs Value on a DDP Shipment?
- Why Are Declared Value and Customs Value Different?
- Which Customs Valuation Methods Do US and EU Authorities Use?
- How Does Transaction Value Work When You Buy DDP from China?
- What Happens When US Customs Questions Your Declared Customs Value?
- How Do HS Codes and Section 301 Tariffs Interact with Your Customs Value?
- What Records Should Importers Keep to Support Their Customs Value?
- DDP vs DDU vs FOB: Responsibility, Charge, and Risk Matrix
- Frequently Asked Questions
What Is Customs Value on a DDP Shipment?
The customs value is the figure the authority accepts after testing the declared value against evidence and market data. A duty-included arrangement is a commercial construct between buyer and seller. The figure inside that construct is not automatically the figure customs accepts.
A common route to a valuation query is treating the service package as if it were the appraised value, then declaring a lower number to close the gap. Customs does not test a declaration against the Incoterm. It tests it against the transaction, the documents, and comparable goods. The sections below work through each layer.
Why Are Declared Value and Customs Value Different?
Declared value and customs value start from the same transaction but do not always end at the same number. Declared value is the figure on the commercial invoice, repeated in the entry data. Customs value is the authority’s conclusion after it has tested that figure. One is a seller’s statement; the other is a regulatory determination.
Both CBP (Customs and Border Protection) and EU customs can question a declaration and re-determine the value. The usual triggers look like this:
- A declared figure that sits clearly apart from comparable consignments of the same goods on the same trade lane.
- Documents that contradict each other — invoice against packing list, entry data against the ISF (Importer Security Filing), quantities against weights.
- A value that looks thin relative to the weight, the volume, or the product category in the container.
- Related-party pricing with no evidence that the relationship left the price untouched.
Related-party transactions are not penalized by definition. They are simply held to a higher evidentiary bar. The reviewing officer tests whether the pricing reflects what an unrelated buyer would have accepted under the same conditions.
Which Customs Valuation Methods Do US and EU Authorities Use?
Both administrations run the same six-step hierarchy drawn from the WTO (World Trade Organization) Valuation Agreement, and each step applies only when the one above it fails to produce a customs value.
- Transaction value — the price actually paid or payable for the imported goods, with permitted additions and deductions.
- Transaction value of identical goods, sold at or around the same time and commercial level.
- Transaction value of similar goods, adjusted for commercial level and quantity.
- Deductive value, worked back from the resale price of the goods in the importing market.
- Computed value, built up from materials, production, profit, and general expenses.
- Reasonable means, applied in a manner consistent with the previous five.
In the United States this hierarchy sits in 19 U.S.C. § 1401a and 19 CFR Part 152, and CBP’s informed compliance publications set out how officers apply it in practice. In the EU the same sequence runs through Articles 69 to 76 of the Union Customs Code, as the European Commission’s customs valuation guidance explains.
For China-origin sea freight, the practical difference between the two systems is the price basis. The same consignment can therefore carry two different appraised figures on the two sides of the Atlantic without anyone misdeclaring anything. The Incoterm does not change this; the destination’s valuation basis does.
| Aspect | United States | European Union |
|---|---|---|
| Price basis for sea freight | FOB (Free on Board) — goods valued at the US border before international transport | CIF (Cost, Insurance, and Freight) — transport and insurance to the EU point of entry included |
| International freight | Outside the appraised figure for the goods | Part of the appraised figure |
| Insurance | Outside | Part of the appraised figure |
| Legal base | 19 U.S.C. § 1401a; 19 CFR Part 152 | Union Customs Code, Arts. 69–76 |

How Does Transaction Value Work When You Buy DDP from China?
Transaction value is the primary method and the one nearly every compliant entry uses, provided four conditions hold. The sale must be genuine. The price must not be subject to conditions or restrictions that affect the value. The seller’s price must not be contingent on the resale of the goods. Where buyer and seller are related, the relationship must not have influenced the price.
A DDP purchase bends none of these conditions by itself. What it changes is the composition of what the buyer pays. The seller-side lump sum bundles carriage, insurance, and duty settlement around the goods.
Under the US FOB basis, those service components sit outside the appraised figure for the goods themselves. Under the EU CIF basis, transport and insurance up to the EU border sit inside it. Either way, the components have to be identified and apportioned, not blended into a single opaque number. The commercial invoice, the stated Incoterm, and the entry data need to tell one consistent story.
What Happens When US Customs Questions Your Declared Customs Value?
When US customs questions a declaration, the review follows a defined sequence starting with a formal request for information. It usually opens with CBP Form 28, Request for Information, which lists the documents required — contracts, payment records, supplier invoices — and sets a response deadline of 30 days. A Form 28 is a request, not an accusation, and a complete, timely response is what closes it.
If the response leaves questions open, CBP issues Form 29, Notice of Action, which proposes the action it intends to take: re-determination of the value, reassessed duty, and in undervaluation cases possible penalties. The importer can respond in writing, seek a hearing, and later pursue a protest under 19 U.S.C. § 1514 if the decision stands.
The consequences of a sustained undervaluation finding go beyond the container in question. Goods are held at the port. Duty is reassessed on the corrected figure. Monetary penalties apply where CBP finds a material false statement. Elevated examination rates follow on subsequent entries from the same importer.
How Do HS Codes and Section 301 Tariffs Interact with Your Customs Value?
The duty due on an entry is the product of three variables: the HS (Harmonized System) classification, the rate attached to it, and the appraised customs value. Section 301 measures add a Chapter 99 line on top of the base HTS (Harmonized Tariff Schedule) line, assessed on the declared customs value of the Chinese-origin goods.
Because the three variables multiply, an error in any one of them surfaces as a duty reassessment. An entry can be correctly classified and still be questioned because the value behind it cannot be supported. Conversely, a well-documented transaction cannot rescue a wrong subheading. Valuation and classification are audited together. A record that supports one but not the other still leaves the entry exposed.
What Records Should Importers Keep to Support Their Customs Value?
Customs can trace a transaction back for years, so importers must retain an evidence chain that supports the declared figure. This evidence lives as much on the buyer’s side as the seller’s, even when DDP terms leave the buyer outside the clearance process. A working file looks like this:
- The purchase contract or purchase order, showing the delivery term and the goods specification.
- Proforma and commercial invoices, matching each other line by line.
- Payment records that correspond to the invoiced figure and the named parties.
- Packing list, carton marks, and labeling consistent with the invoiced quantities.
- For US-bound sea freight, ISF filing data that matches the entry documents.
- Freight and insurance documentation, where the EU CIF basis requires the transport components to be shown or apportioned.
Consistency across these documents is what reviewing officers check first. Mismatches between them are what generate a Form 28 in the first place.

DDP vs DDU vs FOB: Responsibility, Charge, and Risk Matrix
Choosing the correct Incoterm dictates who bears the responsibility for clearance and who must apportion the value for the customs authority. Risk transfers when goods are loaded on board the vessel at the origin port under all three terms.
| Aspect | DDP (Delivered Duty Paid) | DDU (Delivered Duty Unpaid) | FOB (Free on Board) |
|---|---|---|---|
| Import clearance responsibility | Seller | Buyer | Buyer |
| Duty and tax payment | Seller | Buyer | Buyer |
| Freight arrangement | Seller | Seller | Buyer |
| Risk transfer point | Goods loaded on board at origin | Goods loaded on board at origin | Goods loaded on board at origin |
| Valuation basis impact | Seller must apportion DDP lump sum for customs value | Buyer declares value based on commercial invoice | Buyer declares value based on commercial invoice |
Frequently Asked Questions
Does DDP determine how customs appraises goods? No. DDP only assigns import clearance and duty payment to the seller. Authorities assess customs value under their own valuation rules, independent of the Incoterm.
Why do US and EU customs values differ for the same goods? The US uses an FOB basis, excluding international freight and insurance from the appraised figure. The EU uses a CIF basis, including them.
What triggers a customs value query? Queries occur when declared values deviate from comparable consignments, documents contradict each other, or related-party pricing lacks supporting evidence.
What is a CBP Form 28? A Request for Information from US customs. It asks the importer to submit documents supporting the declared value within a set deadline.
Can a DDP lump sum be used directly as the customs value? No. The DDP lump sum bundles carriage, insurance, and duties. These service components must be identified and apportioned before declaration.
Most valuation questions are document questions in disguise. TrustFreight works with mid-sized trading companies and e-commerce sellers importing from China. The routine work is exactly this: checking that the invoice, packing list, ISF data, and entry details tell one story and support the customs value you declare; confirming who clears and who pays under DDP versus DAP (Delivered at Place); and setting out where risk transfers once the goods are loaded on board. If you are planning a DDP shipment and want the paperwork mapped before it sails, send us the cargo details and we will map the route, paperwork and handover.
—
Written by the Trustworthiness International Logistics operations team.





